Narrow V-belt
Do not contact with corrosive substances to rubber, and do not arbitrarily reduce the number of roots in the same group.
Classification:
Introduction
| Model | Pitch (mm) | Top width (mm) | Height (mm) | Length range (mm) | Tensile strength (KN) |
| SPZ | 8.5 | 10.0 | 8.0 | 1000-2000 | ≥ 2.5 |
| SPA | 11.0 | 13.0 | 10.0 | 1000-5000 | ≥ 3.0 |
| SPB | 14.0 | 17.0 | 14.0 | 1000-8000 | ≥ 5.4 |
| SPC | 19.0 | 22.0 | 18.0 | 1400-10000 | ≥ 9.8 |
| 9N(3V) | 9.5 | 8.0 | 1000-4000 | ≥ 2.5 | |
| 15N(5V) | 16.0 | 13.5 | 1000-4000 | ≥ 5.4 | |
| 25N(8V) | 25.5 | 23.0 | 2300-10000 | ≥ 12.7 |
Method of use
To extend the service life of V belt, please install and operate according to the following requirements:
1. Please do not use the same group if the trademark, batch number and length are different;
2, as far as possible in accordance with the same group mark (the same color of the binding rope) used in the same group;
3. Be sure to shorten the distance between the two pulleys before installation;
4, do not contact with rubber corrosive substances, do not arbitrarily reduce the number of roots in the same group.
Key words:
Narrow V-belt
Previous:
Next:
Related Products
Inquiry